I'm quite interested in this capability. I've got a Thinkpad with Intel
drivers for both the wired and wireless adapters (PRO/1000, PRO/Wireless
3945ABG) and I don't see such a setting. On the chance I'm missing it,
would you describe in more detail where it is? I'm guessing it's under the
Advanced tab as a Property, but I don't see such a setting.
Thanks -- this sounds interesting.
-----Original Message-----
From: Jon Galbreath [mailto:[log in to unmask]]
Sent: Friday, March 19, 2010 1:03 PM
To: [log in to unmask]
Subject: Re: [MSUNAG] Think I found the problem (was, RE: [MSUNAG] Network
or DNS issues This Morning?)
Depending on the drivers on the system, you can specify that a wired
connection disables the wifi. I've seen this mostly on Intel drivers, but
some Dell cards support this as well I believe. Since I almost never
install the full [crappy] software package that comes with wifi drivers, you
can look for this setting in Device Manager, under the Properties for the
wifi interface.
Jon
Jon Galbreath
MCSE/Security+
Systems Administrator
International Studies and Programs
Ph: 517-884-2144
[log in to unmask]
-----Original Message-----
From: Doug Nelson [mailto:[log in to unmask]]
Sent: Friday, March 19, 2010 12:07 PM
To: [log in to unmask]
Subject: Re: [MSUNAG] Think I found the problem (was, RE: [MSUNAG] Network
or DNS issues This Morning?)
On Fri, Mar 19, 2010 at 10:05:56AM -0400, Al Puzzuoli wrote:
> After some poking around, I believe I've found the cause of my slow
> performance issue this morning. I have a Windows 7 laptop, which is
> sitting on a dock and plugged into a working ethernet port. However,
> my wireless switch was on, and the machine had a very weak connection
> to a wireless network. I've seen this before and just never put two
> and two together. Once I turned off the wireless switch and rebooted
> the machine, everything began working fine. Does anyone know how I
> can verify the metrics on my network connections and insure that
> ethernet is getting priority?
Yeah, good luck with that. You can see the route metrics by running "route
print" (at least under XP), and you can add/delete routes using the "route"
command, but I don't know where to set default metrics for new connections.
Generally, the wired interface will have a better metric, but I have seen
occasions where my browser traffic will prefer the wireless interface, while
other non-browser connections remain on the wired link. I generally just
kill the wireless when I'm docked.
Doug
--
Doug Nelson, Network Architect | [log in to unmask]
Academic Technology Services | Ph: (517) 353-2980
Michigan State University | http://www.msu.edu/~nelson/
|
